By jp72
Date 27-08-2007 08:54
Edited 27-08-2007 08:57
Here are the actual features of this tool:
- Read realtime engine parameters : Battery voltage, vehicule speed (more to come: coolant temp, RPM, Load, uptime...)
- Read realtime engine raw parameters : Hex codes strings to be decoded to add more engine parameters...
- Read ECU informations (Software version, factory date, VIN number and chassis number,...)
- Read and decode ECU faults : code, explanation, status (current, stored, nb occurences...)
- Reset current and stored ECU faults
- Read ABS informations (Software version, factory date, ABS serial#,...)
- Read and decode ABS faults : code, explanation, status (current, stored, nb occurences...)
- Reset current and stored ABS faults
You can also read the PDF document attached up there to discover menu navigation (this doc is to be updated).
I hope it's clear :)
The tool easily fit into the right panel box, so I could test real time parameters monitoring while commuting this morning (45km), it works great :)
By the way I added a switch and a buzzer, so I'll be possible to fit it right into the C1 and raise an alarm in case a parameter cross a threshold (coolant temp, fault detection).